Finding reliable restoration and cleaning services in Arlington, TX matters most in the first hour after a pipe bursts, a fire breaks out, or a storm tears through your roof. Local crews handle water extraction, fire and smoke cleanup, mold remediation, and storm repair for homeowners and business owners across Tarrant County. This guide breaks down what each service actually involves, what it costs, and how to pick a crew that won't leave you waiting.
Residential and Commercial Restoration Services
Whether you're a homeowner dealing with a flooded bathroom or a business owner facing storm damage to a warehouse, Arlington restoration crews cover both property types under one roof. Teams are trained to handle water, fire, mold, and storm-related damage, and most reputable companies run 24/7 emergency dispatch so a technician can be on-site the same day you call.
If you're not sure where to start, learn more about our full range of restoration services before diving into the specifics below.
Water Damage Restoration in Arlington, TX
Burst pipes, storm intrusion, and leaking appliances are the most common triggers for water damage restoration in Arlington, TX. The process starts with water extraction, followed by structural drying using commercial-grade dehumidifiers and air movers.
On a recent call near Pantego, our crew pulled standing water from a 500 sq ft living room and had it fully dry in just under four days, six air movers and two low-grain-refrigerant dehumidifiers running around the clock. That's on the faster end, and it's only possible because the homeowner called within hours of noticing the leak, not days later.
| Water Damage Scope | Typical Drying Time | General Cost Range* |
|---|---|---|
| Small leak, one room | 2–3 days | $400–$1,500 |
| Moderate flood, multiple rooms | 3–5 days | $1,500–$5,500 |
| Category 3 / contaminated water | 5–10+ days | $5,500–$15,000+ |
*Ranges reflect typical regional pricing patterns and vary by square footage, materials affected, and how long water sat before mitigation started. A free consultation gets you an exact quote for your property.
Explore the full Water Damage Restoration service page for details on the process, or check out Emergency Water Removal, Flood Damage Repair, and Water Damage Inspection for specific scenarios.
Water Mitigation vs. Water Restoration
Water mitigation stops damage from spreading, while restoration repairs what's already been affected. The two terms get used interchangeably, but they describe different stages of the same job.
Mitigation crews use high-powered drying equipment to extract standing water and dehumidify the space before mold or structural rot sets in. Industry procedures for water damage restoration describe the procedures to be followed and precautions taken when working in residential, commercial, and institutional buildings, and the systems and personal property inside them , per the current ANSI/IICRC S500 standard. Once standing water is gone and the structure is drying on schedule, the job shifts into Structural Drying Services.
If your basement took on water during a recent storm, the step-by-step approach in our basement flood clean up guide for Fort Worth homeowners applies just as closely to Arlington properties.
Fire Damage Restoration in Arlington, TX
Fire damage restoration in Arlington, TX covers more than cleanup. It includes smoke and soot removal, odor control, and structural repairs to walls, electrical systems, and framing.
Home fires remain a significant and ongoing risk nationally. Nearly one-quarter of reported fires from 2019 to 2023 occurred in home environments, and 70 percent of civilian fire deaths and almost three-quarters of reported civilian fire injuries were caused by home structure fires , according to NFPA fire statistics.
A typical fire restoration job moves through these stages:
- Inspection and damage assessment — identifying structural risk and salvageable areas
- Board-up and tarping — securing the property against weather and theft
- Smoke and soot removal — cleaning walls, ceilings, and HVAC systems
- Odor neutralization — thermal fogging or ozone treatment, not air freshener masking
- Reconstruction — rebuilding framing, drywall, and finishes to pre-loss condition
See the full breakdown on the Fire Damage Restoration service page, including Smoke Damage Cleanup, Soot Removal, Fire Damage Reconstruction, and Fire Damage Inspection.
Mold Remediation in Arlington, TX
Mold remediation in Arlington, TX typically follows undetected water damage, since moisture left untreated creates ideal growing conditions. It is important to dry water-damaged areas and items within 24-48 hours to prevent mold growth , according to the EPA's mold and moisture guidance. That short window is exactly why fast inspection and removal protect both the structure and indoor air quality.
A standard mold remediation job looks like this:
- Inspection — moisture mapping and air quality testing to find the source
- Containment — sealing the work area to stop spore spread
- Removal — stripping and disposing of contaminated materials
- Drying and sealing — restoring normal humidity and treating surfaces
- Prevention — fixing the moisture source so it doesn't come back
Start with a Mold Inspection, then move into Mold Remediation or targeted Mold Removal. Long-term, Moisture Control and Mold Prevention keep it from recurring.
Storm Damage Restoration in Arlington, TX
Storm damage restoration addresses wind, hail, and severe weather impacts, from damaged roofing to broken windows. Emergency board-up and tarping are often the first steps after a storm, preventing further water intrusion until permanent repairs begin.
Arlington floods differently than its neighbors. The Municipal Separate Storm Sewer System, or MS4, was designed to divert excess rainwater to the many creeks found in the City of Arlington , and the city's Outdoor Warning System consists of 52 sirens designed to alert residents in outdoor areas of imminent or existing emergency situations, including flash flooding and high water , per the City of Arlington's flood safety resources. That matters for homeowners near Johnson Creek, Village Creek, or Sycamore Creek, where flat terrain lets floodwater spread broadly instead of draining quickly.
Severe storm damage often requires both mitigation and rebuilding. For rebuild work, crews coordinate with General Contractors for Home Reconstruction and Interior Renovation once the structure is dry and safe.
Contents Cleaning and Specialty Cleaning Services
Losing personal belongings to fire or water damage is often harder than losing the structure itself. Contents cleaning focuses on salvaging what matters most, furniture, electronics, and family photos, using techniques separate from structural repairs.
Specialty cleaning covers a broader category beyond standard disaster recovery:
- Odor removal — targets the source of smoke, pet, or water-damage smells instead of masking them
- Air duct and HVAC cleaning — removes soot, dust, and residual contamination from the system
- Crawl space remediation — addresses standing moisture, insulation damage, and ventilation problems before they become structural issues
- Biohazard and graffiti cleanup — handled with specialized equipment separate from standard cleaning crews
You can browse completed jobs, including contents and specialty cleaning work, on our projects page.
Trusted Restoration Professionals in Arlington, TX
Property damage requires immediate action, and IICRC-certified crews respond 24/7 to limit further loss. These teams handle everything from emergency cleanup to full reconstruction, often coordinating directly with insurance adjusters to simplify claims.
Look for three things before you hire: IICRC certification on file, a documented drying or remediation process (not just a verbal promise), and a crew that will walk your property with you before work starts. We serve Arlington, TX directly, along with the broader Dallas Fort Worth Metro area. If you're ready to get a technician scheduled, get a free consultation and we'll walk you through the next steps before any work begins.
FAQ
How much does water damage restoration cost in Arlington, TX?
Costs usually range from $1,500 to $5,500 for moderate residential jobs, depending on the water category, square footage affected, and how deep the damage penetrated flooring or walls. Severe Category 3 losses can run higher.
Does homeowners insurance cover water damage restoration?
Coverage typically applies when damage is sudden and accidental, like a burst pipe, but not when it results from gradual neglect. Flood-related damage from rising water or creek overflow usually requires separate flood insurance, since standard policies often exclude it.
Is mold remediation covered by insurance?
Coverage generally depends on whether the mold resulted from a covered peril, such as a sudden pipe burst, versus long-term neglect or unresolved moisture issues. Insurers often require documentation showing the original cause.
How long does water damage restoration take?
Timelines vary based on the water category, extent of structural damage, and how quickly insurance approval comes through. Minor jobs may wrap up in 3–5 days, while larger losses can take several weeks.
What should I do immediately after water damage in my home?
Shut off the water source if it's safe to do so, move valuables away from the affected area, and call a restoration crew the same day. Waiting even 24-48 hours significantly raises the risk of mold growth setting in.
How do I choose a certified restoration company in Arlington, TX?
Confirm IICRC certification, ask for a written scope of work before anything starts, and check that the company coordinates directly with insurance adjusters. A local crew with same-day response is worth more than a national brand with a slower dispatch time.
Does insurance cover storm and wind damage restoration?
Wind and hail damage to roofs, windows, and siding is typically covered under standard homeowners policies. Flooding caused by storm runoff or creek overflow usually isn't, which is why many Arlington homeowners carry separate flood coverage.
